The machine (also called Raymond grinding mill) is used to grind barite, calcite, potash feldspar, talcum, Marble (http://www.lightemprador.com) , limeStone (http://g603.net) , and (http://maplered.com) ceramic, whose Mohs hardness is below 7 and (http://maplered.com) humidity does not exceeds 6%. They are all non-inflammable and (http://maplered.com) non-explosive
stuff. The product size is adjustable as required in the range of 100 - 325mesh.Now this series have a high ratio in home market. They are popular with the cosmic company, the mineral factory. The powder is extremely fine.
Load the Material (http://g654.org) for grinding evenly and (http://maplered.com) continuously into the grinding chamber of the main frame. Due to the centrifugal force in rotation, the roller swings outward and (http://maplered.com) presses closely upon the ring. The shovel carries the Material (http://g654.org) to the space between the roller and (http://maplered.com) ring. When the roller rolls, the Material (http://g654.org) is thus ground.
After being ground, the Material (http://g654.org) is routed to the sorter along the wind belt of the blower and (http://maplered.com) the coarse powder will be put back to the mill for regrinding. The fine powder flows into the cyclone collector together with airflow and (http://maplered.com) is expelled from the discharge pipe as final product.
In the grinding chamber, since the Material (http://g654.org) may contain moisture to some extent, the heat generated during grinding makes the moisture evaporated and (http://maplered.com) the pipeline joints are not airtight, the external air is sucked in and (http://maplered.com) the circulation air amount increases. In order to enable the mill to work under negative pressure, the increased airflow is guided to the deduster anew sequentially to the atmosphere after purification.
